Automatic Door Air Shower And Automatic Door Cargo Shower Fan

- Mar 20, 2019 -

The automatic door air shower chamber and the automatic air shower chamber fan are respectively lantian fan brand EDF-195 type and lantian fan brand EDF-240 type, automatic door air shower room and automatic door cargo shower room blower structure compact and small size does not occupy a large space installation position The installation is simple and convenient, and the base type is installed; the fan has low noise, high wind pressure and large air volume; the fan is thin, and is designed for the small space of the air shower room.

 

It can also be used in printing equipment and air supply ventilation. The maximum air volume is 2550 cubic meters per hour and the maximum wind pressure is 1250 Pa. Mounting method base 4 M6 screws are fixed.

 

lantian fan EDF-195 model air shower chamber fan is mainly used for single single air shower room or double single air shower room for 6-9 left and right sides of the air shower nozzle with a diameter of Φ of 25mm, the wind speed can reach 23m/ s or so. Better to achieve the effect of purifying dust.

 

lantian fan brand EDF-240 model air shower chamber fan is mainly used for single person double air shower room, for the left and right sides to spray 12 diameter Φ 25mm air shower chamber nozzle, wind speed can reach 23~27m / s or more. Better to achieve the effect of purifying dust.

 

The automatic door air shower room and the automatic door cargo shower room fan have an idea prompting system. When the person is blowing, the automatic voice system prompts people to complete the entire blowing dust removal process in an orderly manner, and the humanized voice prompt gives a kind of intimate feeling. And the effective purification effect is achieved. The clean air flow filtered by the high-efficiency filter is sprayed from all directions to the human body by the rotating nozzle, and the dust particles are effectively and quickly removed, and the air is filtered from the initial and high-efficiency and then blown to the air shower area.

 

However, there are many people who are not very familiar with the air shower fan. The following is a description of the characteristics of the air shower fan by the blue sky fan purification fan manufacturer.

 

The automatic door air shower room and the automatic door cargo shower room fan have the advantages of small volume, large air volume, low noise, high wind pressure and simple installation.


image


Automatic door air shower and automatic door cargo shower fan features:

 

1. The accuracy of the general air shower stepping motor is 3-5% of the step angle, and it does not accumulate.

 

2. The maximum temperature allowed by the appearance of the stepping motor of the air shower.

 

If the temperature of the stepping motor of the air shower is too high, the magnetic material of the motor will be demagnetized first, which will cause the torque to drop and even lose the step. Therefore, the maximum temperature allowed by the motor surface should depend on the demagnetization point of the magnetic material of different motors;

 

Generally speaking, the demagnetization point of magnetic materials is above 130 degrees Celsius, and some even up to 200 degrees Celsius, so the external temperature of the stepper motor is completely normal at 60-80 degrees Celsius.

 

3. The torque of the stepping motor of the air shower will decrease with the increase of the speed. When the stepper motor rotates, the inductance of each phase winding of the motor will form a back electromotive force; the higher the frequency, the larger the back electromotive force.

 

Under its action, the motor decreases with increasing frequency (or speed), resulting in a drop in torque.

 

More information about the air shower fan, all in the blue sky fan. Wuxi Lantian Special Fan Co., Ltd. is a manufacturer specializing in wind turbine manufacturing. It is located in Wuxi City, Jiangsu Province. It covers an area of more than 15 acres and has more than 9,000 square meters of standard factory buildings. It has a deep technical center, fan processing center and complete facilities. Fan testing center, machining center has CNC laser cutting machine, large CNC punching machine, large CNC hydraulic press, plasma cutting machine, spinning machine, balancing machine, shearing machine, bending machine, and other excellent CNC automation equipment. Contact: 18851570668.


 https://www.wxltfan.com/