When installing the high pressure centrifugal blower, use the flat washer and spring washer to tighten the screws. When used, it is best to use the rubber cushion gum to bear the weight of the high pressure centrifugal blower, especially the high power high pressure centrifugal blower.
High pressure centrifugal blower must be equipped with mufflers to reduce the noise in some occasions with some noise requirements (generally speaking, about 5dB ). The muffler will be installed in the air inlet pipe or at the end of the wind tunnel.
High pressure centrifugal blower installed in some of the noise requirements for occasions, must be based on the conditions of the machine itself, equipped with a layer of muffler, so that the site can meet the noise requirements. The specific situation should consult the manufacturer of high pressure centrifugal blower or professional noise control company.
When using the muffler silk floss to erasure, pay attention to the distance between the fan and box, the ventilation and heat dissipation of the high pressure blower. Use the rubber cushion gum to bear the weight of the high pressure centrifugal blower. This point, users need to consult the manufacturer of high pressure blower, such as Siemens.
The inlet and outlet pipe connection of the high pressure centrifugal should use the hose connection, so that can isolate the vibration. Different use site will use filter element with different filter precision. Different filter elements will have different maintenance methods and service life. When booking the high pressure centrifugal blower, ask clearly.