In the process of operation, the material conveying centrifugal fan mainly uses pneumatic force as the blower for conveying. The feeding fan is often used in the process of operation for plastic granules, powder and granular food, etc. The material conveying centrifugal fan is transported cleanly. , no oil, no gas, more environmental protection and other advantages.
The use of material conveying centrifugal fan
Material transport Centrifugal fans to a certain extent are mainly used for wood processing companies such as: man-made board factories, timber factories, furniture factories and other similar units. They can disperse wood and bamboo by virtue of wind force. Materials are sent from A to B.
Material conveying centrifugal fan form
The bulk material conveying fan can be made into two types: right rotation and left rotation. From the drive group facing the fan, clockwise rotation of the impeller is referred to as right rotation and indicated as right; counterclockwise rotation is referred to as left rotation and indicated as left. The outlet position of the fan is represented by the outlet angle of the casing. Left and right can be made into 3 angles of 0, 90, and 180 degrees.
Material conveying centrifugal fan features
The biggest characteristic of the bulk material conveying fan is that large pieces of wood and large pieces of wood are unobstructed when passing through the fan, which overcomes the problems of card and plugging when using other fans in the system. It has reasonable structure and consideration, reliable and stable operation, high efficiency, adaptability to working conditions, low noise and easy maintenance. It is an indispensable special equipment for wood, bamboo equipment, furniture, plywood factory, compression board factory and other units.
The material conveying centrifugal fan is widely used in the injection molding machine raw material industry. It has the advantages of easy installation, simple operation, long distance transmission, stable production and reliable operation and operation. The auxiliary equipment for fully automated production is also called plastic suction. Material feeders, feeders, fillers, etc. are suitable for short materials. If the material is too long, it is easy to wind the shaft and cannot be used.