The High Pressure Centrifugal Blower will have the function of blowing and sucking during the operation. When used, it can be used for both air and air. It can also be blown, with less oil or no oil. The output air is clean, compared to the centrifugal. For fans and medium-pressure fans, the pressure is much higher, often more than ten times that of centrifugal fans.
The pump body of the high-pressure centrifugal fan is integrally die-casted. When the operation is performed and the anti-vibration mounting foot is used, the requirements for the installation foundation are also very low, and the operation can be performed even without fixing the foot. It is convenient and saves installation cost and installation period. Compared with similar fans, its operation noise is low, and ultra-quiet high-pressure fans are introduced.
The high-pressure centrifugal fan is maintenance-free. Its loss parts are only two bearings. During the warranty period, basically no maintenance is required. The mechanical wear of the high-pressure fan is very small, because there is no mechanical contact part other than the bearing. Therefore, the service life is of course very long, as long as it is under normal conditions of use, 3 to 5 years is completely no problem.